Wasp WLS9600, Product Reference Manual

Page: 123 / 306

ENTER/EXIT PROGRAMMING MODE Code 39 Set Length 1
Product Reference Guide 113
Code 39 Set Length 1
This feature specifies one of the barcode lengths for
Code 39 Length Control
. Length 1 is the
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length
Mode. Length includes the barcode’s data characters only. The length can be set from 0 to 50
characters.
Table 2 provides examples for setting Length 1. See page 242 for detailed instructions on setting
this feature.
Table 2. Code 39 Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
02 = Length 1 is 2 Characters