CLAY KIT
7
TANK HOLDER
ASSEMBLING PROCEDURE
Unscrew the screws “A” above the leg (fig. 1) and then tighten the
screws after aligning the kit “B” (Fig. 2)
This support is adaptable to 4070 by adding two 270 mm “F” tubes
and two M6 “G” set screws contained in the kit. (Fig. 3). In the
holder “H” it is possible to attach the pressure gauge (fig. 4)
A
B
Fig.1
Fig.3
Fig.4
Fig.2
F
G
H
Summary of Contents for Clay Kit
Page 1: ...CLAY KIT...