Getting Started
10
ASSEMBLY ON
OTHER PRINTERS
HARDWARE MODIFICATIONS
I’ts possible to modify and assembly the LDM WASP extruder
system on other kind of printers.
On our website it’s possible to download a folder containing the
extruding system and the fixing plate technical drawing and the 3D
models (V1), it’s possible to modify these models in order to mout
the system on other printers.
FIRMWARE MODIFICATIONS
In order to make the LDM WASP extruder working properly, it will
be necessary to adapt and modify the firmware of the used printer.
The following modifications will be needed:
• disable the extruder temperature sensor (if present)
• enable the Cold Extrusion
• modify the E-Step per mm, LDM extruder value “400”
• modify the printing area dimensions, based on the new extruder
dimensions
• modify the Z min endstop height (if present)
The use of the LDM WASP extruder has been tested and
guaranteed only on WASP printers, warranty and assistance will be
made at discretion of the manufacturer (WASP) in case the system
is used on other printers.
The Manufacturer declines all liability for injury to persons and
damage to components due to an incorrect use of the product or
assembled on other company products.
Summary of Contents for Clay Kit
Page 1: ...CLAY KIT...