Getting Started
• Be sure that the two tank caps are tight before the pressurization of
the tank until the thread is not visible anymore
• Ensure periodically the tank and top thread and check any consume
or damage
• Always keep clean the threads, a wrong closure could be dangerous
• Periodically grease the threads
• Don’t pressurize the tank if there is some old or dry material inside
the 12mm nylon hose
• Check the video tutorial at the address: https://www.youtube.com/
watch?v=1DjVC5MxJr4
• Keep away from children
• Do not exceed the maximum pressure of 8 bar
• After every use unload the material from the extruder and from the
12mm nylon hose
• Do not point the tank to things or people when it’s pressurized and
without cap
• Be sure that the 8mm teflon and the 12mm nylon hose are inserted
correctly
• Be sure that the extruder cooling fan is functioning
• Be sure that the extruder is empty, clean and without obstruction
before the use
• Do not put fingers inside the extruder
• Do not ingest the extruded material
• Be sure that the hose do not present narrowings or bottlenecks
• Check periodically the consumption of the hose in the connection
points
• Do not replace parts not supplied by the manufacturer
• The kit can be used only by trained staff
4
WARNING:
Carefully read the instruction before the use
Summary of Contents for Clay Kit
Page 1: ...CLAY KIT...