41
Card programming
Programming Extraction (rib marked H) shall
always be preceded by Drain (rib marked K).
This shall also be programmed during the entire
extract cycle.
Programming Stop with signal (rib marked M)
can be carried out several times during the same
wash program. When the program comes to
Stop, a buzzer sounds and the machine stops.
Press RESTART to restart the machine.
RESTART may not be used without having a
program card inserted in the machine.
Use ribs C, I, A, E and G for signals when
connecting external dispensing equipment.
Programming example
The following card is programmed for normal
soiled wash:
Pre-wash
The pre-wash lasts for approximately 3 minutes
(peg nos. o to 6. It begins with Filling with cold
water and hot water to high water level and
dispensing of detergent from compartment 1 (peg
no. 0 in ribs N, A, O and Q cut away).
Ribs N, A, O and Q are cut at peg no. 1 as a
safety measure to ensure that the wash cycle is
correct even though the program card may be
pushed too far into the program controls.
The program stops the card at peg no. 0 until the
water level is reached. The running time once the
water level and required temperature are
reached is 2 minutes (peg nos. 1-5 cut away in
ribs N, O and Q).
Ribs N, O and Q are cut away for the entire pre-
wash to ensure that the temperature and water
level are maintained during the entire wash
sequence. It is usually necessary to top up with
water since the dry wash goods soak up a certain
amount.
The pre-wash is concluded with Drain for one
minute (peg nos. 5 and 6 in rib K cut away).
1743
1744
71
70
Extraction
Washing
Draining
Filling with water and
detergent
{
{
Rest position
(programmed
as row 0)
Drain before and during
extraction
Fig.
70
Fig.
71
A. Det. (1) or signal 1
B. Heating
C. Detergent, (2)
D. Heating
E. Signal 3
F. Signal 2
G. Signal 4
H. Extraction
I. F. soft. (3) or sign.5
K. Drain
L. Spare
M. Stop with buzzer
N. High level
O. Cold water
P. Detergent (2) cold
Q. Hot water
A. Det. (1) or signal 1
B. Heating
C. Detergent, (2)
D. Heating
E. Signal 3
F. Signal 2
G. Signal 4
H. Extraction
I. F. soft. (3) or sign.5
K. Drain
L. Spare
M. Stop with buzzer
N. High level
O. Cold water
P. Detergent (2) cold
Q. Hot water
