Technical Manual LAZ 5100 / ES 5100
INSTALLATION, CARE AND MAINTENANCE
TH 52 603 8001 EN Rev.: S
Technical Manual LAZ 5100 / ES 5100
5-11
In order to set or alter the parameters for Channel 2, call up the CHANNEL 2 MENU,
as follows:
Call up the
SERVICE
MENU
as previously described
CURSOR
(2x, to mark
Channel
2
)
ENTER
(1x, to call up the Channel 1 parameters
MENU
as shown below)
Figure 5-6 Channel 2 Menu
Proceed from here in exactly the same way as described for
Channel 1.
To call up the INTERFACE MENU proceed as follows:
Call up the
SERVICE
MENU
as described previously
CURSOR
(3x, to mark the word Interfaces)
ENTER (1x, to call up the INTERFACES SUB-MENU)
The
INTERFACE
MENU
shown below will appear.
External PC
Mode 8N1 (7E1, 7E2, 8N1, 8E1, 8N2, 8E2)
Baud 19200 (1200, 2400, 4800, 9600, 19200, 38400 Baud)
NMEA/DAZ 25
Mode 8N1 (7E1, 7E2,
, 8E1, 8N2, 8E2)
8N1
Baud 4800 (1200, 2400,
, 9600, 19200, 38400 Baud)
4800
Rep. rate SLOW (SLOW, FAST)
INTERFACES
Protocol DPT/DBT (DPT/DBT, ELAC)
Figure 5-7: Interface Menu
This menu allows the service technician to adjust the interfaces to fit to other
peripheral equipment, e.g. a personal computer or digital slave indicators.
Draft 0.0 (0.0..29.9 m)
Trim 0.0 (0.0...4.9 m)
Blocking Depth 0.0 (0.0...2.9 m)
CHANNEL 1
Frequency 50 (24, 28, 33, 38, 50, 100, 200 kHz)
Location BOW (BOW, AFT, Stb., Pt.)