Technical Manual LAZ 5100 / ES 5100
OPERATING INSTRUCTIONS
4-16
Technical Manual LAZ 5100 / ES 5100
TH 52 603 8001 EN Rev.: S
4.5.2
The PARAMETER Menu
To call up the
PARAMETER MENU
, press the
ENTER
key twice.
Channel Select 1 (1, 2, 1/2)
Sound Velocity 1500 (1400....1699)
Units m (m, ftm, ft)
Depth Mode DBK (DBK, DBT, DBS)
(Auto, Man)
Gain auto
PARAMETER
Figure 4-18: Parameter Menu
The
PARAMETER MENU
is used to select system parameters which vary from those
laid down by the IMO. The following settings can be made within this
MENU
:
Channel
selection
Sound velocity setting
Selection of measurement units
Depth mode selection
4.5.2.1
Channel Select
The Channel Select function is only operative in dual channel equipment.
When the system is switched on, channel 1 is the default setting. This function is used
to select the channel to be shown on the display area.
Presentation of Channel 1, Channel 2, or both channels is possible. If both channels
are selected, they will appear side by side on the display area, Channel 1 to the right
and Channel 2 to the left.
Call up the
PARAMETERS MENU
and press the following keys to make a selection:
CURSOR
(1x, to mark Channel Select)
ENTER
(1x, to mark Channel number)
CURSOR
or
(to make selection)
ENTER
(1x, to confirm selection)
ESCAPE
(2x, to leave the
MENU
)
