Technical Manual LAZ 5100 / ES 5100
INSTALLATION, CARE AND MAINTENANCE
TH 52 603 8001 EN Rev.: S
Technical Manual LAZ 5100 / ES 5100
5-7
Once the system has been correctly installed, the initial set-up can be carried out.
Call the
SYSTEM SET-UP MENU
by pressing the
ENTER
key four (4) times. When
the
SYSTEM SET-UP MENU
appears on the display area, press the
CURSOR
key
three (3) times so that the word
Service
is highlighted as shown below.
Figure 5-2 System Set-Up Menu
Press the
ENTER
key and the
WARNING
shown below will appear.
Changing parameters
in the following
menus should only
be done by qualified
persons
Continue ? NO NO/YES, select YES for SERVICE menu
WARNING!
Figure 5-3 System Set-Up Menu (Warning)
WARNING!
Only qualified service technicians are allowed to alter these system settings.
If you are not authorised to alter these settings, DO NOT continue. Press
either the ENTER or ESCAPE key to return to the SYSTEM SET-UP menu.
UNAUTHORISED alteration of these settings can endanger the safety of the
ship and lead to loss of life and limb.
If not authorised to make alterations, press the ESCAPE or ENTER key to
return to the SYSTEM SET-UP menu.
Date 05.05.03
Time 12:34
Color Bar
Version
SYSTEM-SETUP
Service
>>
Version number and date