Breakers and/or Fuses
Breakers and/or fuses are usually located under or near
the dash panel.
If a breaker trips, determine and correct the fault, then
reset by pushing the breaker button.
If a fuse blows, determine and correct the fault, then
replace the fuse.
7-6
WARNING
Shock/Fire Hazard
Disconnect electrical system from its power source
before performing maintenance. Never work on the
electrical system while it is energized.
Electrical appliances must not exceed the rated
amperage of the boat circuits.
Observe the electrical system carefully while it is
energized.
Only a qualified marine electrical technician may
service the boat’s electrical system.
CAUTION
Turn off engine before inspecting or servicing battery.
Disconnect battery cables before working on
electrical system to prevent arcing or damage to
alternator. Disconnect negative (-) cable first, then
positive (+) cable.
WARNING
Shock/Fire Hazard –
Replace breaker or fuse with same
amperage device. Never alter overcurrent protection.
