Recommissioning
Boat Stored on Land/Trailer – Checklist
Boat:
a.
Components – inspect and clean
b.
Hull drain plugs – install
Engine:
a.
Refer to engine operator’s manual for detailed
information on fitting out after winter storage
Batteries:
a.
Terminal posts – clean with wire brush or steel
wool
b.
Cable clamps – attach positive (+) cable first,
then negative (-) cable; tighten
c.
Terminals and clamps – apply protective grease
d.
Wiring – inspect for deterioration
Fuel System:
a.
System – inspect for loose connections, worn
hoses, leaks, etc.; repair as necessary
Miscellaneous:
a.
Thru-hull fittings – check to ensure water
passage is unobstructed and hoses/fittings are
serviceable
b.
Navigation lights – check for proper operation
c.
Wiring – check for loose connections
d.
Switches – check for proper operation
e.
Equipment – check for proper operation
f.
Bilge blowers – check for proper operation; turn
on blowers and place hand over hull blower vent
to make sure air is coming from vent.
g.
Anchor lines and gear – inspect and replace if
necessary
h.
Hull drain plugs – installed
i.
Bilge – clean thoroughly
j.
Engine – check for proper levels
7-11