WARPP INARC-400 I, User Manual

Page: 23 / 27

13. Maintenance
In principle, Machine’s maintenance and repair should be completed by
us or our authorized distributors. Customers can also solve the problems
instructed by us or our authorized distributors.
:
1. Periodic inspection and maintenance :
(1)
Remove dust from power resource with compressed air
by our authorized maintainer every 3- 4 months. Check
if the bolt is loose.
(2)
Check frequently if control cables are worn out,
adjusting knobs are loose, and components of panel are
damaged.
(3)
Check output cable periodically, if jointers are loose or
plugs are distorted, and then please repair it in time,
otherwise the sockets will burn out.
Warning :
Don’t open up side panel of the machine uninstructed, the
max voltage inside the machine is 600VDC, which is very
dangerous. Take safe precautions to prevent from being
electric shock while maintenance.
*************