WARPP INARC-400 I, User Manual

Page: 20 / 27

10. Do’s & Don’ts
Do’s Don’ts
Clean the machine with compressed air @ < 3
Kg/Cm2
Don’t keep any foreign material or plate on the
top cover of the machine
Use proper polarity & current Never use the higher current than recommended
Use proper welding cable size Never use long cable if not required
Use proper welding angle Never use long arc
Make firm connection of welding cable Never use the joint of cable unless proper
technique is used to join the cable
Keep the machine in proper shade to protect it
from rain & direct sun light
Don’t keep the machine in open ground or site