·７·
4. Installation:
This series welder is small, light and portable. They will be more
convenient if place them on the trolleys. Ensure the location
where to
place the welder is even.
IN MIG-I series welders wire diagram as Fig. 1:
Preparation prior to operation procedure:
(1)
Connect the welder’s terminal plug(-) to the work piece by
welding cable
(2)
Connect the welder’s terminal plug(+) to the wire feeder by
control cable
(3)
Connect the welder’s control cable socket to the wire feeder by
control cable.
Fig.1: Wire diagram of IN MIG-I series welders
(4)
Connect feeder’s gas hose to the regulator
(5)
Connect the regulator’s heat-up cable to the welder’s “gas heat-up
power “cable socket. (on the rear
panel)
(6)
Connect the welder’s power cable to the disconnection
