AIRCUT
-101
I
,161
IW
,200
IW Inverter Plasma Cutting Machine
WARPP ENGINEERS PVT LTD
4
Make sure that all the safeguard equipment, machine cover and devices are all in a
good condition. Be sure that arms, clothes and all the tools do not touch all the
moving and rotating components including V belt, gear and fan etc.
Sometimes having to dismantle some parts of the device during maintenance, butmust keep
safety awareness strongly every time.
Do not put your hand close to fans and do not move the brake handle while operating.
Please remove the connection between the engine and the welding equipment to avoid
sudden starting during maintenance.
When engine is hot, it is forbidden to open the airtight cover of the radiator water tank to
avoid hurt by the hot vapor.
8 Electromagnetic
: Welding current going though any area can generate
electromagnetic, as well as the welding equipment itself.
Electromagnetic would affect cardiac pacemaker, the cardiac pacemaker users
should consult one’s doctor first.
The effect ofelectromagnetic to one’shealth isnot confirmed, so itmighthave some
negative effect to one’s health.
Welders may use following method to reduce the hazardous of electromagnetic:
a. Bundle the cable connected to the work piece and the welding cable together.
b. Do not enwind partially or entirely your body with the cable.
c. Do not place yourself between the welding cable and the ground (work piece) cable, if the welding
cable is by your left side, then the ground cable should be by your left side too.
d. The Welding cable and the ground cable are as short as possible.
e. Do not work near to the welding power source.
9Lift Equipment
: carton or wooden boxes package the welding machines supplied by
Warpp Engineers Pvt Ltd .There is no liftingequipment in its wrapper.Users
canmove ittothe prospective area by a fork-lift truck, and then open the box.
If having rings, the machine can be transited using rings. While Warpp Engineers
Pvt Ltd. Welding Machine Manufacture reminds users, there is possible risk to
damage the welding machine. It is better to push the welding machine moving in
use of its rollers unless special situations.
Be sure that the appurtenances are all removed off when lifting.
When lifting, make sure that there is no person below the welding machine, and
remind people passing by at any moment.
Do not move the hoist too fast.
10 Noise
: Warpp Engineers Pvt Ltd
,
Welding Machine Manufacture reminds users:
Noise beyond the limit (over 80 db) can cause injury to vision, heart and audition
depending on oneself.
Please consult local medical institution. Use the equipment with doctor’s permission
would help to keeping healthy.
