AIRCUT
-101
I
,161
IW
,200
IW Inverter Plasma Cutting Machine
WARPP ENGINEERS PVT LTD
11
shown as below figure .
Installation and operation
1
、
Moving and lifting
Power source should be shut off before moving the cutter;
The cutter bottom should be kept downwards during transportation. It is forbidden
to have cutter placed transversely or upended;
When lifting, it must be lifted vertically;
During the long-distance transportation, it must prevent the cutter from raining and
moving back and forth inside box. Shock absorption foam should be placed around
cutter.
2
、
Open the packing and check
Check the machine and packing according to the packing list, of there is any
damage, please try to contact the supplier.
3
、
The fix and installation of the plasma power source
The mounting hole size of the automatic machine use plasma cutting machine
(
AIRCUT
-101I )
