12
Warner Electric • 800-825-9050
P-273-5-WE • 819-0529
Figure 12a
If an Enclosed Electro-Module (20 and 20FBB
brake only) is required, an optional Cover Kit,
Warner Electric part number 5370-101-082, can
be purchased separately to enclose the open vents
in the housing and a cover plate to close off the
back of the Module . Each Cover Kit includes two (2)
covers and four (4) screws and one (1) cover plate
needed to convert a vented Electro-Module 20 to
an enclosed design (non-washdown) as shown in
Figure 12b .
20 Module showing
cover plate
Figure 12b
Note:
When using these Cover Kits to enclose the
module the covers should be assembled as the final
step .
Notes:
Visit Warner Electric’s website at
www . warnerelectric .com for dimensional drawings,
weights, inertia’s and a complete offering of our
products including clutches, brakes, and clutch or
brake controls and service parts .
In addition to Warner Electric module products,
other package products, controls, and service
parts information can be found in our Packaged
Electromagnetic Clutches/Brakes Catalog Series:
• NEMA C-Face Compatible Clutches, Brakes &
Clutch Brake Combinations Catalog P-8586-WE
• Shaft Mounted Clutches & Brakes Catalog
P-8587-WE
• Base Mounted Clutch/Brake Combinations
Catalog P-8588-WE
• Electrically Released Spring-Set Brakes & Unibrake
AC Motor Brakes Catalog P-8589-WE
• Permanent Magnet Electrically Released Brakes
Catalog P-8590-WE .
Call 815-389-3771 to request any of our catalogs .
