©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
102854A0
Figure 2
Figure 3
I N S T A L L A T I O N I N S T R U C T I O N S
1. Remove factory cover plate by removing the two carriage
bolts.
2. Set winch in place and mark the sheet metal where the
winch clutch handle interferes.
3. Attach new winch plate (A1) with bent edge facing down
and toward the rear of the vehicle. Secure using the
supplied carriage bolts (B1) and nuts (B2).
4. Tighten hardware per specifications on page 2.
Figure 1
B1 & B2
