©2014 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
8
93900A0
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
TROUBLE SHOOTING
MAINTENANCE / CARE
•
Avoid engaging or removing the plow from the vehicle on uneven, sloped, or soft ground. Doing so may misalign the plow mount
and make it difficult for proper engagement and disengagement of the retaining pins.
•
If you are having trouble getting an alignment puck into the plow mount, it may need some simple adjustment. Ensure that the
plow and vehicle are sitting level. Ensure that the plow base is in the center latched position.
•
After using the plow, the winch cable may begin to tangle around the drum. To fix this, pull off the plow assembly and free spool
the cable out of the winch. Once the tangled cable is pulled off the drum, switch the winch out of free spool and winch the cable
neatly back around the drum. Do NOT grab the cable or winch hook, instead use the winch hook strap provided with your winch
and follow the guidelines as described in the winching guide.
•
Inspect all metal parts on the plow, plow mount, and related hardware prior to each use. Replace all parts that appear rusted or
deformed.
•
Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts and bolts that appear
to be loose. Stripped, fractured, or bent bolts or nuts must be replaced.
•
Check all cables prior to use. Replace cables that are worn or frayed.
•
Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely.
•
See Warn Plow Operators Guide for more information.
If you are having problems with your plow, please follow the steps below:
1. Reference the installation instructions for tips or notes.
2. Contact the dealer where you purchased the kit.
3. Call an authorized WARN Service Center from the warranty sheet included in the kit. Please have the following information
available before calling; part number (listed on front of instructions), date of purchase, and make, model, and model year of ATV.
4. Contact WARN customer service at 1-800-543-9276 or www.warn.com. Again, please have the following information available
before calling; part number (listed on front of instructions), date of purchase, and make, model, and model year of ATV.
WARNING
Failure to perform regular inspections and maintenance on the plow, plow mount, winch, and related hardware may
result in vehicle damage and operator injury or death.
The following replacement parts are available for purchase:
Part #
Description
Notes
71493 Quick Release Pin kit
2x 35136
