Warn Industries
PAGE 6
89786 Rev. A0
10. The 6 foot electrical quick-connect cable furnished is intended for connection to the battery
on vehicle front receiver installations. For winch use at the rear of vehicle, longer quick-
connect cables are available from Warn dealers. For 20 foot kit, order part number 32963.
For 24 foot kit, order part number 32966. Choose a location on the bumper or grille to mount
the quick-connect plug as shown in
Figure 9.
Be sure that the plug from the winch will reach
when the multi-mount is inserted in the receiver with hitch pin in place. Connect the + and -
cable ends to the vehicle battery.
FIGURE 9
11. Snap the dust cover into the vehicle mounted plug to keep it clean when not in use. The
lanyard can be attached to one of the cables or to other locations.
NOTE:
The quick-connect plug mounted on the vehicle and wired to the battery makes an ideal
point to connect booster cables. A heavy duty 16 foot set of boosters made for this purpose is
available from Warn dealers under part number 26771.
WARNING
CHEMICAL AND FIRE HAZARD
Failure to observe these instructions could lead to severe injury or death.
• Always
inspect the quick connect polarity on the cable from the battery AND the cable from the winch
.
