WARN INDUSTRIES
PAGE 4
79235A0
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 1
Figure 2
VI. INSTALLATION
1.
If necessary, remove winch and winch plate.
Remove winch hook so winch can be removed
without the need to remove roller fairlead and
front skid plate.
2. Remove stock M10 fasteners that connect the
aluminum frame rails to the main body frame
(Figure 1). Keep the stock OE flange nuts, they
will be used to bolt on the front plow mount to
the ATV in the next step.
3. Slide plow mount into place from the side
opening of ATV (Figure 2). The plow mount
should sit behind the front frame rail flanges.
4. Using the provided M10 bolts (B5), rebolt the
frames and bottom of the plow mount together.
Use the existing stock OE flange nuts from step
2. Do not tighten completely.
Figure 3
