©2021 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
108777A0
I N S T A L L A T I O N I N S T R U C T I O N S
Figure 2
1. Position and align the plow mount (A1) up against the lower
winch bracket.
2. Secure the upper portion of the mount to the bracket by
installing the two M8-25 bolts (B1) up through the mounting
holes and fasten with two lock nuts (B3). Refer to exploded
view on page 3.
3. Secure the lower portion of mount to the vehicle frame by
installing two M8 x 80mm long bolts (B2) with flat washers
(B4) up through the frame and into the plow mount. Fasten
with and nuts (B3). Refer to exploded view on page 3.
4. Tighten
ALL
hardware at this time to recommended torque
on page 2.
5. Install plow flange (A2) to plow mount using included
retaining pins (B5).
6. Install termination strap (A3) to front of bumper.
7. Complete your plow installation per your plow system
installation instructions.
Figure 1
Figure 3
B2, B4 and B3
B1 and B3
A1
