©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
106093A0
I N S T A L L A T I O N I N S T R U C T I O N S
not fully tighten hardware to allow for adjustment.
10. Install the lower corner bumper bolt (B1) and washer (B2)
through bumper and skid plate and secure with washer
(B2) and nut (B3) (each side).
NOTE: Do not fully tighten
hardware to allow for adjustment.
11. Attach the fairlead to the fairlead bracket (A6) using the
hardware supplied in your winch kit.
12. Align the fairlead plate mounting holes with the bumper
shell mounting holes.
13. Set the winch on top of the bumper shell, aligning the holes
in the fairlead plate.
Tip: We recommend installing the winch power cables to the
winch before installing to bumper. Follow instructions in
your installation guide supplied with your winch.
WARNING
Do not use the bolts supplied in the winch kit to install winch, as
they will not be long enough.
14. From underneath the bumper shell, install four M8 bolts
(B1)
(from this kit)
and hand tighten with four lock washers
(from your winch kit)
.
15. Tighten
ALL
hardware at this time to torque specification on
page 2.
16. Complete your wiring per your winch installation
instructions supplied with your winch.
Figure 8
Figure 9
B1, B2, B3
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
B1, B2,
B3
