©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
106093A0
I N S T A L L A T I O N I N S T R U C T I O N S
mounting bolts previously removed.
5. Install the skid plate (A4) between the frame brackets and
secure to lower bracket hole and frame using one M8 bolt
(B1) and washer (B2) through plate and frame (each side).
6. Loosely secure with washer (B2) and M8 nut (B3) (each side).
Refer to exploded view on page 3.
OPTIONAL: If you purchased the optional light bar, we
recommend installing it to the light bracket before you
install the bumper.
7. Line the winch mounting holes in the bumper shell to the
slots of the frame brackets at this time.
8. Install light bracket (A5) to bumper shell using bolts (B1),
washers (B2) and nuts (B3).
Refer to exploded view on page 3.
9. Install the skid plate’s front mounting bolts (B1) washers (B2)
and nuts (B3) to the bumper shell at this time.
NOTE: Do
Figure 5
Figure 6
Figure 7
Factory bumper
bolts
Light bracket
installed
A1
A2
A4
B2 & B3
A3
B1 & B2
B1 & B2
