©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
101320A0
4. Install fairlead with hardware and per instructions found in
winch kit.
5. You will need to cut the opening of the front plastic to fit
over the winch mount/fairlead.
6. Lay plastic on flat surface.
7. On the inside of the plastic, outline the top of the opening
with one inch wide tape.
8. Carefully cut along the edge of the tape to make opening
larger. Use a small disk sander to smooth the edges.
9. Fit plastic in place and secure with hardware removed in
step 1.
10. Installation is now complete.
I N S T A L L A T I O N I N S T R U C T I O N S
Figure 5
Figure 6
Figure 7
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
Cut
