paGE 5
© 2014 OJ Electronics A/S
First-time Settings – Startup Wizard
When the system has been installed and turned on for the first time, or after you
have performed a factory reset, you must set Language, Date, Time and Floor Type .
The thermostat will automatically guide you through the process .
1 . Language – set the language to be used in the thermostat display .
Tap the language you prefer . Confirm with “
oK
” .
2 . Date – set the current date, which is used for several functions .
Tap the parameter you want to change . Use the “
up arrow
” or “
Down arrow
”
button to set the day, month and year .
Confirm each setting with “
oK
” .
3 . Time – set the current time, which is used to control the “Heating Schedule” .
Tap the parameter you want to change . Use the “
up arrow
” or “
Down arrow
”
button to set the hours and minutes .
Confirm each setting with “
oK
” .
4 . Floor Type – choose between:
Tile: floors made of tile or stone .
Soft Floor: wooden or other engineered floors .
Confirm your choice with “
√
” or discard it with “
X
” .
The thermostat is now ready for use and will control the underfloor heating
according to the preset heating schedule . If you want to change the heating
schedule, please refer to the section titled Heating Schedule .
Please refer to Factory Settings for details of the pre-set heating schedule .
