paGE 33
© 2014 OJ Electronics A/S
This option allows you to choose the type of floor sensor used with the thermostat .
You can therefore choose to use an existing sensor with the thermostat, e .g . in
renovation projects .
Choose the sensor actually used from the list . The sensor supplied with the
thermostat is an OJ sensor listed as: “Factory” .
• Factory (default)
• Sensor 10 kΩ
• Sensor 12 kΩ
• Custom
1 . Tap the “
menu
” button on the home screen .
Then tap the “
Engineer Settings
” button .
2 . Scroll down and tap the “
Sensor Type
” button .
3 . Tap the type of floor sensor actually used .
4 . Confirm your choice with “
√
” or discard it with “
X
” .
5 . If “Custom” is chosen – you must provide resistance values for the sensor
concerned at four given temperatures: 15°C, 20°C, 25°C and 30°C – ask the
supplier of the sensor for these values .
6 . Use the “
right arrow
” or “
Left Arrow
” button to toggle through the temperatures .
7 . Tap the resistance value to change it .
8 . Tap the “
up arrow
” or “
Down arrow
” button to set the resistance .
9 . Confirm the value with “
oK
” . Then repeat steps 6-9 until all four resistance
values have been set .
10 . Tap the “
Left Arrow
” button to return to “
Engineer Settings
” .
Sensor Type
