background image

Contact Us

UK

0345 345 2288

702 & 704 Tudor Estate

Abbey Road

Park Royal

London

NW10 7UW

Warranty

Warmup plc warrants this product, to be free from defects in the workmanship or materials, under normal use and service, for 

a period of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the product is 

determined to be defective, Warmup shall repair or replace it, at Warmup’s option. If the product is defective, please either,

(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or

(ii) contact Warmup. Warmup will determine whether the product should be returned, or replaced.

This warranty does not cover removal or reinstallation costs, and shall not apply if it is shown by Warmup that the defect or 

malfunction was caused by failure to follow the instruction manuals, incorrect installation or damage which occurred while the 

product was in the possession of a consumer.

Warmup’s sole responsibility shall be to repair or replace the product within the terms stated above.

WARMUP SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES 

RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS 

PRODUCT. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY WARMUP MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED 

WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO 

THE THREE-YEAR DURATION OF THIS WARRANTY.

This Warranty does not affect your statutory rights.

Contact Warmup or visit www.warmup.co.uk for details

Warmup - IM - +Kit - V3.2 2017-11-06

NOTE: This product is in compliance with the essential requirements and other relevant provisions of the RED Directive 2014/53/

EU. The Declaration of Conformity may be consulted by visiting: http://www.warmupsmart.com/declarations-of-conformity/kit-

declaration-of-conformity/

Summary of Contents for + Kit

























Reviews: