Warmup + Kit, Installation Manual

Page: 7 / 24

Kit for use with the 4iE
Step 2 - Install the Boiler Receiver (Electrician Required)
Before making any permanent fixtures Warmup recommends progressing through to ‘Step 4 -
Pairing the 4iE & Boiler Receiver ’ upon identifying preferred locations for the Boiler Receiver
and Power Base . This will ensure the wireless connection is not subject to range or interference
issues once installed.
IMPORTANT INFORMATION: Installation of the Boiler Receiver should only be carried out by a
qualified electrician. It requires a permanent 230V supply.
The Boiler Receiver should be connected to the central heating fused spur or circuit breaker in
accordance with current wiring regulations such that there is a single point of isolation for all
interconnected devices.
Ensure that multi stranded wires are fully inserted into the terminals and secured tightly. Any
loose strands should be trimmed as they could cause a short-circuit.
This product uses mains voltage electricity and work should only
be carried out by a qualified electrician. Electrical installation
to be in accordance with latest edition of BS7671 Wiring
Regulations and appropriate Statutory Regulations.
!
7
+