English
ETO2
11
11
Afterrun time Zone 2 : An afterheat duration of between 0 and 18 hours can be
set here. Use the encoder button to set the required afterrun time and press OK.
Zone 1 temperature can be calibrated here. With ETOG-55 sensor, the
temperature shown on the ETO2 display is always the core temperature of the
sensor. For calibration, please see page 13.
Zone 2 temperature can be calibrated here. With ETOG-55 sensor, the
temperature shown on the ETO2 display is always the core temperature of the
sensor. For calibration, please see page 13.
Outdoor temperature can be calibrated here. The temperature, recorded by the
ETF outdoor sensor, can be adjusted so that the exact temperature is displayed
on ETO2. Measure the temperature beside the sensor using a thermometer.
Adjust the necessary offset using the encoder button. Press OK.
The minimum return water temperature can be set here. Set the required
minimum temperature and press OK.
This menu option is only available when water-based heating is used.
The maximum supply water temperature can be set here. Set the required
maximum temperature and press OK.
This menu option is only available when water-based heating is used.
OFFSET T2
0.0C
OFFSET OUT.
0.0C
MIN WATER
5.0C
MAX WATER
55.0C
OFFSET T1
0.0C
AFTERRUN 2
2:00
Summary of Contents for ETO2
