Before pairing, please make sure the
Power Base
and
Boiler
Receiver
are powered. If the LED on the Boiler Receiver is not
slowly flashing RED, indicating that it is ready to be paired, reset
its pairing by pressing and holding the power button for 6 seconds.
Paring
5iE
Step 3 - Paring and Testing
13
The LED on the
Boiler
Receiver
will stop
flashing RED, indicating
a successful connection.
Following the on-screen
instructions, join a WiFi
network, record device
number on
page 17
of this
manual. Test operation.
Press the Pairing Button
on the
Power Base
, as
shown above, using a
short length or wire or
similar to begin pairing
Power
button
LED
Pairing Button
Attach the
Thermostat
Face
to the
Power Base
and tighten both closing
screws.
accept
language
english
1
3
2
4
