PROBES:
•
External sensor
: you are able to attach a second sensor to terminals 6 and 7. You can then use external
sensor function to deine the use of that sensor:
1. External sensor: This is to be used when you can locate the external sensor outside of the heated en-
vironment. When this setting is selected it will display the external temperature on the home screen and
engage weather compensation. Weather compensation saves energy by delaying the start of heating
period by 10 minutes if the difference between internal and external temperature is less than 5°C.
2. 2nd loor sensor: This is to be used if the loor surface area is very large and delicate to overheating.
The reading from this secondary loor sensor will be used to monitor the overheat limit.
•
Probe speciication
: If you have already installed a sensor which was not supplied by Warmup then you
can use this setting to allow your thermostat to function. The possible options are NTC10K (standard probe
supplied by Warmup with the 3IE), NTC12K (probe supplied by Warmup with previous models of thermostat)
and NTC15K. Note that all thermostats are different and Warmup can only validate the thermostat’s perform-
ance when used with a Warmup probe supplied for use with the 3IE.
•
Offset
: in order to improve temperature reading accuracy this
feature allows you to bias each sensor’s temperature reading up
or down by 5°C.
•
Reset
: reset will restore all software settings to the factory
speciied defaults
Hint: if you are experiencing problems with your thermostat then
you can perform a system reset by holding down the button on
the rear of the front module for 10 seconds.
Warmup Plc
702 Tudor Estate
Abbey Road
London
NW10 7UW
T: 0845 345 2288
International: + 44 208 453 6868
F: 0845 345 2299
E-mail: [email protected]
Website: www.warmup.co.uk
WARRANTY
Warmup plc warrants this product, to be free from defects in the workmanship or materials, under normal use and service, for a period
of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be
defective, Warmup shall repair or replace it, at Warmup’s option.
If the product is defective, please either,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or
(ii) contact Warmup. Warmup will determine whether the product should be returned, or replaced.
This warranty does not cover removal or reinstallation costs, and shall not apply if it is shown by Warmup that the defect or malfunction
was caused by damage which occurred while the product was in the possession of a consumer.
Warmup’s sole responsibility shall be to repair or replace the product within the terms stated above.
WARMUP SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR
ANY OTHER FAILURE OF THIS PRODUCT. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY WARMUP MAKES ON THIS
PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE THREE-YEAR DURATION OF THIS WARRANTY.
This Warranty does not affect your statutory rights.
PLEASE REGISTER YOUR WARMUP PRODUCT AT: www.warmup.co.uk
CUSTOMER CARE
For any questions regarding product installation or operation, contact us at:
reset
