background image

HOLIDAY MODE

HOLIDAY MODE allows you to over-ride your schedule with a ixed tem-

perature for a prolonged period of time. This can help save energy if you 

know that you will be out of the house and require minimal heating.

Press the highlighted button next to “holiday mode” to access the menu.

Press “up” or “down” to set the irst day you would like HOLIDAY MODE to 

start.

Press “holiday end at” and then press “up” or “down” to set the day when 

you would like holiday mode to stop. At the end of the HOLIDAY MODE 

your program will return to the current settings. If you would like HOLIDAY 

MODE to continue indeinitely, leave the end date as “not speciied”.

Press “holiday temperature” to set the ixed temperature that will be held 

for the entire HOLIDAY MODE period. 

Pressing “OK” will conirm the selection and HOLIDAY MODE will start at 

12:00 pm on the speciied date.

During the HOLIDAY MODE you will have a modiied home screen. To 

cancel the HOLIDAY MODE at any time just press “cancel”.

If you want to return to HOLIDAY MODE you will need to set it again.

ENERGY MONITOR

Your thermostat monitors the amount of energy your underloor heating 

system is using, you can use these pages to view the amount of energy 

used and set parameters to determine the cost of that energy.

To access this menu press “energy monitor”

If you want to see how much energy you have used, select “view energy 

use” and then select the time period you would like to review

NOTE: if you see the “load settings” option you will need to enter the 

total power in watts of the underloor heating system connect to the 

thermostat. If you are unclear about the power of your underloor 

heating then contact your installer.

On the graph each red bar indicates a time period (in this case it is 

months). The height of the bar indicates that amount of energy in KWH 

used by the underloor heating system during that period. The bar in the 

far right is the most recent time period and the bar on the far left is the 

oldest.  The total amount of energy used in the entire time span is dis-

played in the bottom bar.

Press “OK” to return to the ENERGY MONITOR page.

Summary of Contents for 3IE










Reviews: