6
/
12
■
Product Inner Structure
Installation Guideline
The installation must be in compliance with the National Electrical Code,
your local electrical and plumbing codes.
1. Make sure the appliance is intact, and the fittings are complete.
2. Please make sure the main power supply, water pressure, grounding
condition, ammeter and wire reach the standard of installation requirement.
3. The appliance must be connected to properly grounded dedicated branch
circuits of proper voltage rating. Ground must be brought to the
“
ground
”
at
the circuit breaker panel.
4. This appliance
MUST
be permanently connected to the fixed circuit breaker.
If you don
’
t use the heater, please switch off the circuit breaker.
5.
DO NOT
install this appliance near to tinder or strong magnetic field place.
The appliance can be installed above or under the sink, and unit must only
be mounted in a VERTICAL position near by the water fittings. Please
electrify try the machine after getting through waterway.
