3
/
12
■
Important Safety Instructions
1.
The installation must be in compliance with
the National Electrical Code,
your
local electrical and plumbing codes.
2.
This appliance must be EARTHED.
3. Use this water heater only for its intended use as described in this manual.
4. Contact a qualified electrician to have unit properly installed for the models which are
not equipped with plug.
5. This appliance is not intended for use by persons (include children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
6. This appliance
MUST
be permanently connected to the fixed circuit breaker and it must
be installed vertically (excluding the models which are equipped with plug).
DO NOT
install this appliance near to tinder or strong magnetic field place.
7. This appliance is
forbidden
to be switch on if you think it may be frozen, as this could
result in serious damage to the unit. Wait until you are sure that it has completely thawed
out before you switch it on.
8. Please feel the outlet hot water temperature with hand to make sure it is suitable for
showering before taking shower to avoid getting scalded.
9. Before connecting pipes to the water heater hoses, it is extremely important to FLUSH
the pipes to wash away all plumbing paste or residue in the pipes.
10. If there is damage to the wire, you must contact qualified electrician to replace it with
dedicated wire from our authorized dealers.
11. Check valve is required to be installed at the water inlet.
12. The water relief valve should work periodically in order to remove calcium carbonate
deposits.
13. The drain-pipe which connected to the water relief valve should be installed
continuous downward in frostless environment.
WARNING: Do not switch on if there is a possibility that the water in the
heater is frozen.
