South Bend, Indiana USA
|
networketi.com
PT-SINGLE
INSTALLATION MANUAL | PART NO.
25166
REV
D
TABLE OF CONTENTS
PT-SINGLE
Overview ...............................................................................
2
Installation ................................................................................................ 3
Power Source and Load Connection .................................................... 4
Temperature Sensor Installation ............................................................ 5
Panel Lockout and External Alarm ........................................................ 6
Operation ................................................................................................. 6
Controls and Screens .............................................................................. 7
Settings Screen Viewing/Editing Settings ............................................ 9
Specifications
......................................................................................... 11
Pilot Duty
The
PT-SINGLE
Automatic Heat–Trace Control with GFEP cannot
be used for Pilot Duty applications.
Resistive Load Usage Only
This product is not for use with Inductive loads. Inductive loads
may create nuisance tripping of the Ground–Fault Equipment
Protection circuit.
Abnormal Odor or Smoke
In the event of smoke or a burning or abnormal odor, immediately
interrupt power to the unit by turning off the circuit breaker protecting
the unit.
Electrical Shock / Fire Hazard
Any installation involving electric heater wiring must be grounded
to earth to protect against shock and fire hazard. Suitable ground
fault detection and interrupting systems must be in use at all times to
reduce shock and fire hazard and to protect equipment.
Electric wiring to heating elements must be installed in accordance
with National Electrical Code (NEC)/Canadian Electrical Code
requirements, as well as all other local and applicable electrical
codes and any thirdparty standards. This product is intended for
commercial and industrial applications. Follow the installation
PT-SINGLE
SINGLE–POINT HEAT–TRACE CONTROL THERMOSTAT
WarmlyYours
