Warming Trends CFBL170 NG Owner'S Manual And Instruction Manual Download Page 24

www.Warming-Trends.com  |  303 346 2224  |  [email protected]

24

at no cost for the first year. In the event a system fails after the first year and 

within two years of date of purchase, the cost for a replacement system is 

at a discount rate of 50% of the current listed price. This warranty does not 

cover labor costs. 

• P24VIK Systems purchased AFTER April 15, 2018 are fully warranted 

for three (3) years from date of purchase. In the event a system must be 

replaced due to a defect/malfunction of the system, Warming Trends will 

repair or replace the system at no cost for the first three years.  This warran-

ty does not cover labor costs.

Commercial Installations:

• 24VIK and 3VIK systems are fully warranted for twelve months from date of 

purchase. In the event a system must be replaced due to a defect/malfunc-

tion of the system, Warming Trends will repair or replace the system at no 

cost. This warranty does not cover labor costs. 

• P24VIK Systems are fully warranted for one (1) year from date of purchase. 

In the event a system must be replaced due to a defect/malfunction of the 

system, Warming Trends will repair or replace the system at no cost for 

12 months from the date of purchase. This warranty does not cover labor 

costs.

Problems in the functioning of the systems due to gas plumbing or electrical 

installed by others are not covered by any warranty offered by Warming 

Trends.
No dealer, distributor, or other person has the authority to represent or 

warrant a Warming Trends™ product beyond the terms contained within this 

warranty, and Warming Trends assumes no liability for such warranty repre-

sentations. Any questions concerning this warranty should be directed to the 

Warming Trends™ corporate office.

Return Policy of Warranty Product 

Any Warming Trends™ product deemed by Warming Trends™ as defective 

and covered by the warranty may be returned to Warming Trends™ for 

assessment to determine if repair or replacement is necessary. In order to 

return a product, you must have a Return Merchandise Authorization number 

(RMA#). Please contact a Warming Trends™ representative at the corporate 

office to obtain an RMA#. All returned merchandise must have the RMA# 

clearly printed on the outside of the package.  Return shipping costs are the 

purchaser’s responsibility. Warming Trends™ is not responsible for product 

damaged or lost in transit. It is recommended that return items are shipped 

via a delivery service that can be tracked and/or insured to confirm receipt. 

WARRANTY

Effective June 15, 2020
FULL LIFETIME WARRANTY FOR WARMING TRENDS® BURNERS
WARMING TRENDS warrants that each WARMING TRENDS® Crossfire® 

and other jetted-flame-brass-burners (each as “Burner”) is free from defects 

in materials and workmanship and conforms to its specifications, which are 

available upon request.
The warranty period for a Burner is lifetime warranty beginning on the 

date of purchase (“Warranty Period”). This Warranty is transferable, but we 

reserve the right to require proof of ownership for any transferred burners 

including proof that the Burner was not acquired through improper means 

or unauthorized re-sellers. During the Warranty Period, WARMING TRENDS 

provides repair and exchange services for the Burners, without charge.  If 

a Burner does not function as warranted during the Warranty Period and, 

after a reasonable number of attempts, WARMING TRENDS is unable to 

either 1) make it do so or 2) replace it with one that is at least functionally 

equivalent, you may return it to WARMING TRENDS and your money will be 

refunded.
The warranty stated above will not apply to the extent that there has been 

misuse or use contrary to specifications or the appropriate user or operat-

ing manual, installation defect, accident, modification, unsuitable physical 

or operating environment, operation in other than the specified operating 

environment (e.g., outdoor burners should only be used outdoors) improp-

er maintenance by you, or failure caused by a product for which WARMING 

TRENDS is not responsible.  With respect to Burners, the warranty is voided 

by removal or alteration of any identification labels or marks on any Burner 

or part.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE 

ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, 

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR 

CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE.
ITEMS NOT COVERED BY WARRANTY 

Other than as expressly stated above, WARMING TRENDS does not warrant 

uninterrupted or error-free operation of any Burner or that WARMING 

TRENDS will correct all defects. 

Warming Trends does not warranty any services related to our Burners, 

including installation, unless we provided those services to you.  You may 

have warranty rights from the service provider, but we make no represen-

tations or warranties express or implied regarding any third party service 

provider. 

This warranty also does not apply to any fire logs (including the FireStorm® 

Steel Log) or any of the electronics used in connection with our Burners, 

which may be covered by separate warranties with different terms.
YOUR RIGHTS UNDER STATE LAW 

This Warranty gives you specific legal rights, and you may also have other 

rights which vary from state to state.  You may find this information from the 

Federal Trade Commission helpful in understanding your rights, but we 

recommend you speak to your attorney regarding your specific situation 

and the laws in your state or jurisdiction.  https://www.consumer.ftc.gov/

articles/0252-warranties
IGNITION SYSTEMS WARRANTY  

ALL BURNERS AND ELECTRONICS MUST BE COVERED WHEN NOT IN 

USE OR WARRANTY IS NULL AND VOID

Push Button Ignition Systems: 

There is no warranty offered on any push 

button ignition system.

Electronic Ignition Systems:

 

Residential Installations:

• 24VIK and 3VIK systems are fully warranted for one (1) year with a limited 

warranty for two (2) years from date of purchase. In the event a system 

must be replaced due to a defect/malfunction of the system, Warming 

Trends will repair or replace the system at no cost for the first year. In the 

event a system fails after the first year from date of purchase and within 

two years from date of purchase, Warming Trends will repair or replace 

the system for a cost of 50% of the current list price. This warranty does not 

cover labor costs. 

• P24VIK systems purchased ON OR BEFORE April 15, 2018 are fully war-

ranted for one (1) year with a limited warranty for two (2) years from date 

of purchase. In the event a system must be replaced due to a defect/mal-

function of the system, Warming Trends will repair or replace the system 

Summary of Contents for CFBL170 NG



























Reviews: