6
Once removed the service lid gives access to the heat exchanger for servicing and routine
maintenance as shown in Figure 2. To clean the internal surfaces of the heat exchanger,
remove the main HE inspection door and the HE cleaning mechanism door.
Caution: never
attempt to remove the doors after the appliance has just finished operating as surfaces
will be extremely hot and injury will result.
The combustion pot is located on the inside of the combustion door and can be removed for
servicing and routine maintenance by releasing the toggle latches on either side of the pot as
shown in Figure 3. Once the toggle latches are released the pot will be free to lift vertically from
the combustion shelf.
Caution: never attempt to remove the pot after the appliance has
just finished operating as it will be extremely hot and injury will result.
Figure 2 Service Access. (Service Lid and Insulation Removed)
Figure 3: Combustion Door and Ash Pan Assembly.
