24
Plumbing layout
Casing knockouts can be found on both sides and rear of the appliance along with cutouts in
the galvanised base which allow for the pipes to exit the casing below ground level, see Figure
25 and 26 below. 28mm elbows have been supplied with the appliance for connection. It is
advised that the pipe work from the appliance to the interior of the property must be 28mm and
insulated with a minimum of 9mm pipe insulation. The appliances anticondensation valve is
factoryfitted to ensure a return temperature of 55°C. The integrated variable speed circulating
pump modulates with the modulating heat output of the appliance.
3.4 Wiring Layout
Figure 25: Casing Knock out Positions for Installer Plumbing and Wiring.
Figure 26: Plumbing Options.
