Important Safety Instructions
When using this electrical appliance, basic precautions should be followed to reduce
the risk of fire, electric shock, and injury to person, including the following:
This appliance must be used on an AC supply only and the voltage marked on the
heater must correspond to the supply voltage.
Do not switch the appliance on until it is properly installed as described in this manual.
The appliance must not be located immediately below a socket outlet.
Keep furniture, curtains and other flammable material at least 1 meter away from
the appliance.
Do not leave the appliance unattended during use.
Do not leave the appliance unattended whilst connected to the main supply.
This appliance is intended for household use and should not be used for
commercial purposes.
From time to time, check the cord for damage. Never use the appliance if the cord or
any part of the appliance shows signs of damage.
Do not operate this appliance with a damaged plug or cord, after a malfunction or
after being dropped or damaged in any way.
Repairs to electrical appliances should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
Do not run the main cable under carpets, rugs etc. or anywhere where it may present
a trip hazard.
Do not allow the main cable to hang over sharp edges or come into contact with
hot surfaces.
Only operate this appliance on a flat, stable, heat-resistant surface.
Never immerse the appliance in water or any other liquid.
Do not use the appliance outdoors.
Do not use if you have wet hands.
Never use the appliance on or near hot surfaces.
Before cleaning the appliance, ensure it is unplugged from the power and that it is
completely cooled.
Do not clean the appliance with abrasive chemicals or materials such as scourers as
they may damage the appliance and impair future function.
Never use accessories that are not recommended or supplied by the manufacturer. It
could cause danger to the user or damage to the appliance.
Do not lift the appliance by the front panel.
Examine the wall you want to install the mount to before you start installation. Make
sure that there are not hidden power supply cables, water pipes or other objects
hidden in the wall that might be hit by the drill.
Make sure that the wall is capable of supporting the combined weight of the
appliance. If necessary have a qualified technician to reinforce the wall.
At least two people with technical knowledge and experience are needed to install this
product. Contact a qualified technician if you do not understand these instructions or
parts of it, if you have doubts and if you do not have required tools in hand.
