Hardware Controls — rear Panel
Power
The eqp-WA requires a 3-pin, grounded ieC cord, and should ship
with the power cord appropriate for the territory in which it is sold.
Voltage is selectable between 115v and 230v operation, from the
rear voltage selector switch. power input is via a standard fused
ieC power receptacle with built in fuse access, chassis mounted on
the rear of the unit. power is turned on and off via the toggle switch
labeled ‘oN/off’ on the right side of the unit’s front panel.
audio ConneCtions
The eqp-WA has both Xlr and ¼ inch TrS balanced inputs and
outputs, rear chassis-mounted, operating at line level. unbalanced
connection is also possible via a ¼ inch TS cable. it is not advised to
connect both input connectors or both output connectors at once.
5
The rear panel
