7
890667_c•en•01.09.2014
We reserve the right to carry out improvements
Example 6:
Delete learned-in products from the hand-held
transmitter basic and the network
You can remove the learned-in products completely from
the hand-held transmitter basic and the network.
First, scanning is repeated (see example 5 on page 6)
to identify the learned-in devices.
IUE
O
Devices that do not need to be deleted must be
de-energised.
As soon as the transmission LED lights up orange, you
can start the deletion process.
Button/
display
Cction/result
Press the learn button on the WMS Hand-
held transmitter basic for approx. 5 s
+
L-LED
lights up green; the transmission
LED
flashes. For several seconds, the
hand-held transmitter scans the range for
receivers.
By pressing the learn button again, the
process can be aborted.
The L LED goes out.
If, while scanning, the hand-held transmitter
basic finds a target device (receiver,
transmitter, sensor) that has already been
learned in:
The transmission LED
lights up
GREEN: Lights up continuously for 2
seconds
Then scanning continues.
The transmission LED
lights up for 2
seconds
ORANGE Scanning stops.
+
Press the
STOP button
and
simultaneously.
The delete command is sent to all learned-
in receivers.
Those receivers that are still learned-in wave
when they are deleted from the hand-held
transmitter basic and the network.
The transmission LED
indicates the result
of the deletion process:
Transmission LED
flashes
GREEN: The devices are deleted.
Transmission LED
flashes
RED:
Not all target devices have
been deleted.
Press the STOP button
.
The deletion command is sent repeatedly
to find receivers that were not within
the radio range during the first deletion
command and to delete them as well.
Briefly press the learn button to leave the
learn mode.
IUE
O
When you delete a receiver from the network,
it can no longer be operated via other
transmitters. It must be relearned into a
network.
IUE
O
It only makes sense to delete products via the
hand-held transmitter basic in smaller networks
(two to three awnings or roller shutters). In
more complex networks and when routing
tables are used, a normal hand-held transmitter
or a central control unit should be using for
deletion.
