5
890667_c•en•01.09.2014
We reserve the right to carry out improvements
Button/
display
Cction/result
Press the STOP button
.
The found target device (transmitter or
sensor) is added to the network.
The target device waves in confirmation.
Briefly press the learn button
to leave
the learn mode.
Step 2:
Copy channels from one hand-held transmitter basic (1)
to another hand-held transmitter basic (2)
Button/
display
Cction/result
Briefly press the learn button on the hand-
held transmitter basic (1)
L-LED
lights up green
Briefly press the learn button on the TARGET
TRANSMITTER
(hand-held transmitter basic 2)
L-LED
lights up green
The transmission LED
on the hand-held
transmitter basic (1) flashes
GREEN During the transmission of data
from the hand-held transmitter basic (1) to the
hand-held transmitter basic (2); this ends with
GREEN Lights up continuously
for 2 seconds,
transmission successful
RED
Light up continuously
for 2 seconds,
error during transmission
L-LED
on the hand-held transmitter
basic (1) and (2) goes out.
Example 4:
Uhe existing system with a WMS Hand-held
transmitter basic is expanded to include a WMS
Hand-held transmitter
Step 1:
Cdd the WMS Hand-held transmitter to the existing
network with a WMS Hand-held transmitter basic
Button/
display
Cction/result
Wake up the WMS Hand-held transmitter
basic with the STOP button
Wake up the (large) WMS hand-held
transmitter with any
product button
Press the learn button on the WMS Hand-
held transmitter basic for approx. 5 s
+
lights up green; the transmission LED
flashes. For several seconds, the
(large) WMS hand-held transmitter scans
the range for devices.
The hand-held transmitter basic does not find
any device during scanning:
The transmission LED
lights up
ORANGE:
No receiver found.
Button/
display
Cction/result
If the hand-held transmitter basic finds a
receiver, transmitter or sensor that has not
yet been learned in, scanning is stopped. It is
indicated as follows:
The transmission LED
lights up
RED: New device
When you press the control button
,
you can check WHICH target device was
just found.
The product then waves and the control
function LED
flashes
RED: The target device (transmitter
or sensor) can be added to the
network.
Press the STOP button
.
The found target device (transmitter or
sensor) is added to the network.
The target device waves in confirmation.
Briefly press the learn button
to leave
the learn mode.
You can now add additional scanned products in the
same manner.
Briefly press the learn button to leave the
learn mode.
IUE
O
If the large WMS Hand-held transmitter is still in its
factory state (no products have been learned in
yet), the
lights up in red after the transmitter
wakes up.
Step 2:
Copy the channel from a hand-held transmitter basic to
a WMS Hand-held transmitter
Button/
display
Cction/result
Press the learn button briefly
L-LED
lights up green
Wake up the large WMS Hand-held
transmitter with any product button
Select the desired channel on the target
transmitter by pressing and holding the
button of the desired product.
Briefly press the learn button on the TARGET
TRANSMITTER
L-LED
lights up green
The transmission LED
on the hand-held
transmitter basic flashes
GREEN During the transmission of data
from the hand-held transmitter
basic to the target transmitter;
this ends with
GREEN Lights up continuously
for 2 seconds,
transmission successful
RED
Light up continuously for 2
seconds,
error during transmission
L-LED
on the hand-held transmitter
basic goes out
