Operating and installation instructions
WAREMA Mobile System
WMS Hand-held transmitter basic
Keep for future use!
Valid from 01 September 2014
890667_c•en•01.09.2014
We reserve the right to carry out improvements
1
Safety instructions
CAUTIO
C
The hand-held transmitter basic is for indoor
use only. It is not water-proof. Do not leave
the hand-held transmitter basic outdoors.
CAUTIO
C
Never activate buttons on your WMS Hand-
held transmitter basic arbitrarily without
visual contact to the sun shading product.
Children must not play with this product –
remote controls or transmitters must not get
into the hands of children!
Carry out the following steps in the sequence given to
ensure problem-free operation:
Please read these instructions carefully.
Insert the batteries.
Learn the WMS Hand-held transmitter basic into the
receivers.
Check that the system is functioning correctly.
Iperating elements and displays
A
Fig. 2 Operating panel of the WMS Hand-held transmitter basic
General information
Fig. 1 WMS Hand-held transmitter basic
The WAREMA Mobile System (WMS) Hand-held transmitter
basic is used for the remote control of WAREMA WMS
receivers. The receivers send a confirmation of the
received commands, and the hand-held transmitter basic
indicates that it received the confirmation.
The WMS Hand-held transmitter basic supports five
different product types (awning, roller shutter, external
venetian blind, window, light).
Only one receiver or one group with multiple receivers of
the same product type can be actuated at any one time.
The comfort control functions can be switched on and off
via the WMS Hand-held transmitter basic.
If a control function is preventing operation of the product
(e.g. a wind alarm), this is also displayed on the WMS
Hand-held transmitter basic.
Tntended use
This device was developed to control WAREMA Mobile
System (WMS) receivers. The approval of the manufacturer
must be obtained for uses outside of the purposes listed
in these instructions.
