WAREMA WMS-RP, Setting Instructions Manual, Page: 5 / 14

Commissioning
2009231 [Rev. 4 - en]/2015-12-08 Page 5 | 14
2.4 Setting the motor limit positions
INFO
For commissioning, voltage must be applied to the drive.However, voltage should only be applied to one product at a
time.
The direction of rotation of the drive is adjusted automatically after "setting the motor limit positions". ( see Page 9 ).
When "setting the motor limit positions", the drive is in "dead man's mode" ( see Page 9 ).
Chec
k
Is t
he hand-held tr
ansmitt
er learned in?
Press the button to wake up the hand-held trans-
mitter.
WMS Hand-held trans-
mitter:
WMS Hand-held trans-
mitter basic:
If lights up red, the
hand-held transmit-
ter is not learned in.
Learn in the hand-
held transmitter in-
to the product ( see
Page 8 ).
A
If
A
and are flash-
ing orange, the hand-
held transmitter is not
learned in. Learn in
the hand-held trans-
mitter into the product
( see Page 7 ).
W
aking up t
he
hand-held tr
ansmitt
er
Press the button to wake up the hand-held trans-
mitter.
S
tar
ting t
he
se
tting pr
ocedur
e
Press the mode button briefly with a pointed ob-
ject.
WMS Hand-held trans-
mitter:
WMS Hand-held trans-
mitter basic:
The LED begins
flashing.
The transmission
LED begins flash-
ing.
Clearing t
he limit positions
Press the control button briefly.
"Klack-Klack"
The drive clicks twice.
Se
tting t
he mo
tor limit positions
The limit positions are cleared.