Information on safety
2009231 [Rev. 4 - en]/2015-12-08
Page 3 | 14
1
Information on safety
Warnings are marked in the instructions with this
symbol.
Read through the product instructions before
use.
Observe all safety and setting instructions.
The basic safety instructions
can be viewed under
www.warema.de/Sicherheitshinweise
Target group
These instructions are intended for use by qualified fitters
(commissioning) and electricians (connections).
Permissible activities
Performing tasks on the product that are not described in
these instructions is not permissible. No other alterations
are to be carried out on the product other than as described
in these instructions without the written approval of
WAREMA.
Intended use
The drive is intended for operation of the following products:
Top-mounted roller shutter
2
Commissioning
2.1
Information on the limit positions
Lower motor limit position
The drive has a position-controlled limit switch-off at the
bottom.
Upper motor limit position
The drive has a position-controlled limit switch-off at the
top.
2.2
Aids for commissioning
Test cable
(v
ene
tian blind swit
ch)
Ar
t. no. 634013
1
2
1 UP button
2 DOWN button
INFO
For WMS Hand-held
transmitters up to a
certain version (see label
on the back), Mode 1
needs to be performed
(for the procedure, see
the WMS Application
brochure).
Rev.D/M
WMS Hand-held tr
ansmitt
er basic
(fr
ont) - Ar
t. no. 1002953
A
1
2
3
4
5
6
7
1 Control button
2 Automatic LED
3 UP button
4 STOP button
5 DOWN button
6 Comfort button
7 Transmission LED
WMS Hand-held tr
ansmitt
er
(fr
ont) - Ar
t. no. 1002767
1
2
3
4
5
6
7
8
9
10
11
1 Control button
2 Control function dis-
play
3 Numbers display
4 Product buttons
5 UP button
6 STOP button
7 DOWN button
8 Comfort button
9 Scene button
10 Transmission LED
11 Info button
WMS Hand-held transmitt
er (back)
1
2
1 Learn button
2 Mode button