890362_b•en•21.03.2011
We reserve the right to carry out improvements
44
WAREMA Quatronic dialog
®
Operating instructions
Select the desired parameter by pressing the
or
button.
Example
Dawn/dusk
Dawn
In this menu, you can change the settings for each facade (
F1
-
F4
) using the
/
buttons.
Dawn limit UP
: 30Lx OFF OFF OFF
(Dawn) CH1 CH2 CH3 CH4
The
OFF
setting is achieved by setting the value to
0
. The word
OFF
appears
instead of
0
. This switches off the dawn/dusk control at the respective fa-
cade.
Leave the menu after completing the entries using the
disp/prog
button.
This saves the changes you made.
7.2.2 usk, dawn
The effects of the settings are addressed below in more detail.
The
Dusk
,
Dawn
limit values can be set to between 0 and 99 Lux.
Dusk: If the readings drop below the
Dusk
limit value, the sun shading prod-
ucts are lowered.
Dawn: If the readings exceed the
Dawn
limit value, the sun shading products
are raised
NOTE
The brightness measured at photo sensor 1 is critical for the dawn/dusk con-
trol.
For the dawn/dusk control, the delays are fixed and cannot be individually
adjusted:
Dusk delay: 5 minutes
Dawn delay: 5 minutes
omfort functions
awn/ usk control
