waratah HTH616C SIII, Operator'S Manual

Page: 74 / 92

Miscellaneous—Carrier
T7M7G6M,0000666 -19-26APR21-1/6
Continued on next page T7M7G6M,0000666 -19-26APR21-2/6
Welding on Carrier or Harvester
Head—TimberRite™
1. Park the carrier and place the harvester head on a
flat, even surface.
IMPORTANT: Electrical system damage can occur by
an electrical welder current; electrical equipment
must be isolated. Failure to isolate electrical
equipment can damage the electrical system
and may require component replacement.
2. Turn the TimberRite™ key-switch to the “off” position.
3. Turn off any electronics wired directly from the battery.
4. Turn off the main power to the carrier.
5. Disconnect the carrier battery.
TX1022193
—UN—17MA
Y07
TX1033494A
—UN—14DEC07
TimberRite is a trademark of Deere & Company
6. Disconnect the power connector (1) to the controller.
7. Disconnect the CAN 1 connector (3).
1— Power connector 3— CAN 1 connector
1
3
XJ1
162926
—UN—1
1JUN14
TimberRite™ controller module
4-1-2 081921
PN=74