waratah HTH616C SIII, Operator'S Manual

Page: 60 / 92

Maintenance—Schedule
T7M7G6M,0000694 -19-26APR21-1/1
Maintenance—Every 50 Hours or Weekly
SPECIFICATIONS
Feed Roller Nut Torque 325 N·m
240 lb-ft
Feed Roller Mount Cap Screw
Torque
250 N·m
185 lb-ft
1. Complete daily checks.
2. Inspect the frame, arms and knives for cracks or
excessive wear. Replace components and sharpen
knives as required.
3. Check feed arm and upper arm pin (1) and feed arm
and upper arm pin collar retaining cap screws (2), (if in
hardwood applications). (See Pins.)
4. Check condition of feed roller. (See Feed Roller.)
5. Check feed roller nuts (4). (See Feed Roller.)
6. Check feed roller mount cap screws (3). Torque cap
screws (M16) to specification.
7. Grease the length measuring roller bearings. (See
Fluids and Lubricants.)
4
2
3
1
TX1055644
—UN—23FEB09
1— Feed arm and upper arm pin
2— Feed arm and upper arm pin
collar retaining cap screw
3— Feed roller mount cap
screw (10 used)
4— Feed roller nut (6 used)
3-2-3 081921
PN=60