Maintenance—Schedule
T7M7G6M,0000695 -19-26APR21-2/2
T7M7G6M,0000696 -19-26APR21-1/1
IMPORTANT: Corrosion can build up on the diameter
sensor plates. This will result in inaccurate
diameter measurements.
7. Remove the diameter sensor (5). (See the Component
Technical Manual for instructions).
8. Inspect the diameter sensor and rotate the shaft (6)
several revolutions in both directions by hand.
9. Inspect the diameter sensor linkage.
5— Diameter sensor
6— Diameter sensor shaft
5
6
XJ1294126
—UN—12MAR20
Maintenance—Every 2000 Hours or Yearly
SPECIFICATIONS
Ring to Tilt Frame Cap Screw
(1/2-in. UNF) Torque
171 N·m
126 lb-ft
CAUTION: Prevent possible injury while working
in the arm capture zones or saw bar opening. Keep
away from the arm capture zones or the saw bar
opening of the harvester head while the hydraulic
system is active. Failure to follow the safety
precautions can lead to risk of serious injury.
1. Complete 6 month checks.
2. Check rotator ring to tilt frame cap screws. Torque cap
screws (1/2-in. UNF) to specification.
3. Check the condition of the delimb arms, feed arms,
links, pins, bushes and main frame.
4. Inspect rotator pinion support for cracks.
4
2
2
1
3
3
2
2
1
3
3
TX1287200
—UN—24OCT19
1— Rotator ring
2— Feed arm
3— Delimb arm
4— Rotator pinion
3-2-7
081921
PN=64
Summary of Contents for HTH616C SIII
Page 2: ......
Page 88: ...Miscellaneous Wood Measurement 4 4 2 081921 PN 88...
Page 91: ...Index Index 3 081921 PN 91...
Page 92: ...Index Index 4 081921 PN 92...
