8
MOUNTING INTERFACE
The outlet pipes of the valve are made from PEHD100 and can be configured from the factory with either straight pipe
spigots, DIN flanges, loose DIN flanges, ANSI flanges or socket joints. For custom mounting solutions contact Wapro.
OPERATING DEVISES
All Wapro valves are available with a diverse range of operating devices. Both for direct mounting on the valve as well
as to extend the operation of the valve. Lengths are made to order. Note that as standard the valves come without any
operating device. Handwheel, extensions or other operating devises can always be ordered after initial delivery. Contact
Wapro and provide valve type and size.
If a operation extension is used, it is necessary to use wall brackets to eliminate excessive flexing. The brackets should not
be placed more than 1,5m apart.
AMBIENT CONDITIONS
The device is rated for use in temperature between -25°C & 40°C. If the devise is used below freezing temperatures the
buildup of stagnant water inside the valve is not allowed as ice formation inside the valve can permanently damage it.
RETROFITTING AN ACTUATOR
If the user wishes to retrofit an actuator, we recommend contacting Wapro for technical information on torque
requirements and interface measurements. If an actuator adapter is mounted, the interface on the device follows ISO
5211.
Valve with handle
Valve with extension
Valve with key top
Valve with bracket
